The Ghost is a unique, next generation device that secures your vehicle without the need for cutting wires or adding aftermarket key fobs. The device is connected to the vehicles CAN data network and a personalised PIN code is programmed into the ghost using buttons on the dash and steering wheel.
Silent Operation
- Because the unit communicates with the ECU on the data bus to immobilise the vehicle there is no way a thief could listen for the tell-tale clicking of a traditional immobiliser relay.
Service / Valet mode
- Service mode allows your vehicle to temporarily start and drive without requiring the PIN code. The Ghost will exit service mode based on speed and time or by simply entering the PIN code.
Weatherproof tiny device
Emergency PIN code afterwards
- If the PIN code is forgotten, the car is sold or a button is broken there is a secure, unique reset code for each device.
Simple Pin code change Process
- At any time you can easily change the PIN code. Only you will know the unique PIN code for your vehicle.
Uses original buttons for PIN code
Engine Start Blocking
- The Ghost will prevent the staring of the engine unless the unique, user defined PIN code has been entered first.
Stops key cloning & ECU swapping
- A thief cannot simply add a new key or replace an ECU to bypass the Ghost and start the vehicle. Only a correct PIN code will allow the engine to start.
Tested for each vehicle
Engine Start Blocking
- The use of the CAN data bus has several advantages including low risk during installation, low probability of detection, and allows for placement almost anywhere in the vehicle.
Undetectable using diagnostics
- A modern thief can use diagnostics to detect circuit cuts on modern vehicles. The Ghost has no circuit cuts so it cannot be found using these methods
No radio frequency signals